Siemens SIMATIC S7-1500R CPU 1513R-1 PN – 6ES7513-1RL00-0AB0

The Siemens SIMATIC S7-1500R CPU 1513R-1 PN (6ES7513-1RL00-0AB0) is a programmable logic controller designed for redundant automation systems where operational availability and reliable industrial control are important. It belongs to the Siemens SIMATIC S7-1500R family, which is intended for applications requiring a coordinated redundant controller architecture.

This CPU provides 300 KB of work memory for programs and 1.5 MB of work memory for data. Its integrated PROFINET RT interface, featuring a two-port switch, supports communication with compatible industrial automation devices over a PROFINET network.

The CPU can be used as part of a suitably engineered redundant automation system for process control and industrial applications where reducing the risk of control-system interruption is a priority. Redundancy requires compatible system components, supported network architecture and correct engineering; a single CPU alone does not provide a complete redundant system.

Key Product Features

• Manufacturer: Siemens

• Product family: SIMATIC S7-1500R

• CPU model: CPU 1513R-1 PN

• Order number: 6ES7513-1RL00-0AB0

• Controller type: Redundant automation CPU

• Program work memory: 300 KB

• Data work memory: 1.5 MB

• Communication interface: PROFINET RT

• Integrated switch: Two-port switch

• Rated supply voltage: 24 V DC

• Permissible supply voltage: 19.2–28.8 V DC

• Typical bit operation time: 80 ns

• Typical word operation time: 96 ns

• Memory card: SIMATIC Memory Card required

• Maximum supported memory card capacity: Up to 32 GB, subject to Siemens compatibility requirements

• Engineering software: STEP 7 in TIA Portal; verify the required version for the CPU firmware

• Product status: Cancelled; Siemens lists it as a spare-part model

1. Designed for Redundant Automation

The SIMATIC S7-1500R platform is designed for automation applications where high availability is important. In a properly configured redundant system, compatible controllers and system components work together to improve operational continuity if a supported fault occurs.

This can be useful for industrial processes where unexpected interruptions may affect production, equipment operation or process stability. The actual redundancy functions depend on the complete system architecture, compatible hardware, software configuration and supported operating conditions.

2. Program and Data Memory

The CPU 1513R-1 PN includes 300 KB of program work memory and 1.5 MB of data work memory. These resources support control logic and application data within the limits of the CPU's capabilities.

Before selecting this controller for a project, compare the required program size, data requirements, communication load and redundancy needs with the available system resources.

3. PROFINET RT Communication

The integrated PROFINET RT interface supports real-time Ethernet communication with compatible industrial devices. The built-in two-port switch offers convenient connection options for supported network configurations.

Depending on the system design, PROFINET can be used to connect compatible distributed I/O, automation devices and other supported industrial equipment.

4. Industrial System Integration

The CPU can be integrated into a suitably designed Siemens SIMATIC S7-1500R automation system. Engineers should verify compatibility with the selected I/O modules, communication devices, network components and other system hardware before installation.

For replacement projects, review the existing hardware configuration and controller firmware to help ensure that the replacement matches the requirements of the installed system.

5. TIA Portal Programming

The CPU is engineered using Siemens STEP 7 in TIA Portal. Siemens documentation identifies TIA Portal V17 for firmware V2.9, V16 for firmware V2.8 and V15.1 for firmware V2.6.

Always check the CPU firmware and the engineering software version before opening, modifying or downloading a project. Using compatible software and firmware helps reduce configuration and commissioning problems.

6. SIMATIC Memory Card Requirement

A compatible SIMATIC Memory Card is required for this CPU. The memory card provides the required load memory for the controller.

Check the product offer to confirm whether a compatible memory card is included. Accessories may need to be purchased separately, depending on the supplier's package.

Industrial Applications

The Siemens CPU 1513R-1 PN may be appropriate for supported redundant automation projects such as:

• Industrial process-control systems

• Manufacturing plant automation

• Water treatment and utility systems

• Continuous production processes

• Industrial infrastructure control

• Chemical and process-industry automation

• Production facilities requiring high availability

• Redundant PLC system maintenance

• Existing Siemens S7-1500R system replacement

• Industrial installations using compatible PROFINET devices

• Automation systems designed to reduce unplanned interruptions

Application suitability depends on the complete system design, controller configuration, supported redundancy functions and engineering requirements.

Technical Specifications

Important Product Lifecycle Information

Siemens lists 6ES7513-1RL00-0AB0 as a cancelled product effective 1 October 2024 and identifies it as a spare-part model. Siemens also identifies 6ES7513-1RM03-0AB0 as the successor product. The successor offers 600 KB of program work memory and 2.5 MB of data work memory.

If you need this CPU for an existing installation, confirm availability and compatibility before ordering. If you are planning a new installation or system upgrade, compare the successor's specifications with your project requirements and verify the supported hardware, firmware, engineering software and redundancy configuration.

Why Choose PLC Mart BD?

PLC Mart BD helps customers identify Siemens PLCs and industrial automation components using their exact manufacturer part numbers. Accurate part-number identification is especially important for redundant controllers because compatibility with the existing automation architecture must be confirmed.

When enquiring about this product, provide the complete order number 6ES7513-1RL00-0AB0. Confirm product availability, condition, warranty, included accessories and delivery arrangements before placing an order.

Ordering Checklist

• Confirm the full Siemens order number.

• Check whether the product is available as a spare part.

• Verify compatibility with the existing SIMATIC S7-1500R system.

• Check the required TIA Portal and firmware versions.

• Confirm that a compatible SIMATIC Memory Card is available.

• Verify compatibility with the installed PROFINET network and I/O devices.

• For new projects, compare the successor model before purchasing.

• For replacement projects, review the existing controller configuration and redundancy architecture.

Product Summary: The Siemens SIMATIC S7-1500R CPU 1513R-1 PN, part number 6ES7513-1RL00-0AB0, is a redundant automation CPU with 300 KB program work memory, 1.5 MB data work memory and PROFINET RT communication with an integrated two-port switch. A SIMATIC Memory Card is required. Siemens lists the model as cancelled and identifies 6ES7513-1RM03-0AB0 as its successor.